---
title: "Character Sprite Sheets: Which Animations Your Game Needs"
description: "Plan a character sprite sheet before drawing it: which animations to make, frames per animation, facing directions and mirroring, cell size, and row layout."
canonical_url: "https://spritesheetgenerator.online/guides/character-sprite-sheet"
last_updated: 2026-11-01
meta:
  author: "Dennis Postma"
  "og:description": "Plan a character sprite sheet before drawing it: which animations to make, frames per animation, facing directions and mirroring, cell size, and row layout."
  "og:image": "https://spritesheetgenerator.online/guides/og-character-sprite-sheet.png"
  "og:image:alt": "Character Sprite Sheets: Which Animations Your Game Needs"
  "og:title": "Character Sprite Sheets: Which Animations Your Game Needs"
  "twitter:image": "https://spritesheetgenerator.online/guides/og-character-sprite-sheet.png"
  "twitter:image:alt": "Character Sprite Sheets: Which Animations Your Game Needs"
---

> Index of every page on this site: [llms.txt](https://spritesheetgenerator.online/llms.txt)

## Start From the Verbs

A downloaded "complete animation list" is a good way to burn out. Forty animations at six frames each is 240 drawings, before a single level exists.

Work from the game instead. Write down what the player makes the character do: run, jump, swing a sword, take a hit. Anything the game can trigger needs an animation. Anything it cannot trigger does not.

Then add the states nobody chooses but everybody sees. Standing still, falling off a ledge, getting hurt, dying. These are the ones that get forgotten, and their absence looks like a bug. A hero who freezes mid-stride when the stick is released reads as broken.

## The Core Set

A typical side-scroller character, with normal frame counts at 8 to 12 fps. These are ranges people use, not rules.

| Animation | Frames | Loops? | What it is for |
| --- | --- | --- | --- |
| **Idle** | 2-6 | Yes | Breathing, blinking. Shows the character is alive |
| **Walk** | 4-8 | Yes | Basic movement. Four frames is enough for small sprites |
| **Run** | 6-8 | Yes | Faster movement, more lean, longer stride |
| **Jump** | 1-3 | Hold last | The rise. Often one frame is enough |
| **Fall** | 1-2 | Yes or hold | The descent, split from jump so the game can switch at the apex |
| **Land** | 1-2 | No | A quick squash on impact. Optional, but it sells weight |
| **Attack** | 3-6 | No | Wind-up, strike, recovery |
| **Hurt** | 1-2 | No | A flinch, usually paired with a flash or knockback in code |
| **Death** | 4-8 | No, hold last | Ends on a pose that can stay on screen |

Idle, walk, jump, and hurt are enough for a playable prototype. The rest can be placeholders until you know the game is fun.

**Tip**

Split jump into **rise** and **fall**, even on tiny sprites. Your physics code already knows whether the character is moving up or down, so picking the animation is one comparison. A single jump animation has to guess how long the character stays in the air, and the guess breaks whenever you tune the jump height.

## How Many Frames Is Enough

Fewer than you expect. A four-frame walk at the right speed reads as walking, and at 16x16 or 32x32 nobody can follow eight in-betweens anyway. Each extra frame is also one more drawing to redo when the design changes.

Put frames where the motion is large. A sword swing travels far in very little time, so a smear frame helps. An idle barely moves, so two frames held for half a second each is plenty. Timing, holds, and the four poses of a walk are in the [pixel art animation guide](https://spritesheetgenerator.online/guides/pixel-art-animation).

## Attacks Have Three Parts

Fighting game designers split every attack into three phases, and the idea works in any game with combat:

1. **Startup** is the wind-up. The sword goes back. It is the warning the other side gets, and a longer startup feels heavier.
2. **Active** is the strike, the frames where the hitbox exists. Often one or two.
3. **Recovery** is the follow-through, while the sword comes back to rest and the character is open to a counter.

Turn the hitbox on during the active frames, not after a timer, and the animation and gameplay cannot drift apart. You also get a tuning knob that needs no new art: hold the startup frame longer and the attack becomes slower and easier to read.

## Directions and Mirroring

A side-scroller needs one facing direction. Draw the character facing right and flip it in the engine when it turns: `flip_h` in Godot, `flipX` on a Unity `SpriteRenderer`, `setFlipX()` in Phaser. That halves the art.

Top-down games need more:

| Setup | Drawn directions | Mirrored | Total rows per animation |
| --- | --- | --- | --- |
| 4-way | Down, up, side | Side for the other side | 3 |
| 4-way, no mirror | Down, up, left, right | None | 4 |
| 8-way | Down, up, side, two diagonals | Side and diagonals | 5 |

8-way means five drawn rows per animation against three for mirrored 4-way. Start with 4-way; you can add diagonals later if movement looks stiff.

**Watch out**

Mirroring flips everything, including details that should not flip. The sword moves to the other hand, an eye patch switches eyes, a side parting jumps across the head. For most characters nobody notices. If the design is strongly one-sided, draw both directions.

## One Cell Size for Everything

Every frame of every animation should sit in a cell of the same size. Of all the decisions here, this one saves the most trouble later.

Size the cell for the biggest pose, not the idle. The idle might fit in 24x32, but the sword swing reaches 20 pixels further and the jump tucks the knees up. Size for the idle and the attack frames either get clipped or end up in bigger cells, and since the engine anchors every cell the same way, the character visibly hops sideways when the animation changes.

So find the widest and tallest frames across all animations, add a pixel or two, and use that everywhere. If you are starting from nothing, the [basics guide](https://spritesheetgenerator.online/guides/sprite-sheet-basics) lists common frame sizes.

## Keep the Feet on One Row

The feet should land on the same pixel row in every frame of every animation (jumps excepted, obviously). That row is the baseline, and it is usually where the engine pivot goes.

If the idle stands on row 30 and the walk on row 31, the character sinks a pixel every time it starts walking. Small, but once you see it you keep seeing it.

In the [editor](https://spritesheetgenerator.online/editor), **Alignment** snaps every sprite to one edge of its cell. Choose bottom and frames drawn at slightly different heights all stand on the same floor. Then put the engine pivot at the bottom center of the cell, and the position in your code is where the feet are.

## One Animation Per Row

This layout works in every engine:

- One row per animation, top to bottom, each starting at the left edge
- The sheet is as wide as the longest animation; shorter rows end early
- For top-down, one row per animation per direction (idle-down, idle-up, idle-side, walk-down, and so on)

You can open a sheet like that, count along a row, and know exactly what to tell the engine. A Phaser animation is a frame range and a Godot `SpriteFrames` animation is a list of frames, and both are easy to set up when "walk" means row 2, frames 0 to 7.

The alternative is one sheet per animation: `hero-idle.png`, `hero-walk.png`, and so on. Those are easier to edit and swap out, at the cost of more textures to load. For one player character it hardly matters, so go with whichever you will keep organized. With many enemies on screen, one sheet per character keeps texture switches down.

## Building It in the Editor

If your animations exist as separate GIFs or frame folders, the editor can combine them:

1. **Import each animation** in order. A GIF opens in the importer, where **GIF frames** splits it; several PNGs dropped together become one frame each. The [GIF guide](https://spritesheetgenerator.online/guides/gif-to-sprite-sheet) covers conversion in detail.
2. **Set Columns** to the frame count of your longest animation. Frames fill the grid in order, so after a short animation the next one starts mid-row. Right-click the first frame of the next animation and choose **Insert empty frame before**, once per empty cell needed, until it starts at the left edge.
3. **Set Alignment** to bottom so every frame stands on the same baseline.
4. **Check each animation** in the **Preview** tab. Turn on **Compare sprites** to get the Visible Frames list, then uncheck every frame outside one animation. Playback skips hidden frames, so that one animation loops on its own.
5. **Export** the PNG plus your engine's format. The Godot export puts all frames in one animation named `default`; split it into idle, walk, and the rest in the SpriteFrames panel. In Phaser, define each animation as a frame range on the same texture.

## Before You Draw

Answer these before drawing the second frame of anything:

- Which actions can the player trigger, and which states will they see?
- Which four animations go in the prototype?
- One direction plus mirroring, or more?
- What is the biggest pose, and what cell size fits it?
- Which pixel row is the baseline?
- One sheet per character, or one per animation?

Each takes a minute to decide now. After fifty frames, every one of them is expensive to change.

**Frames ready? Put them on one sheet.** [Open the editor](https://spritesheetgenerator.online/editor)

## **Try it in the editor**

The editor is free and needs no account. Open it in another tab and work through the steps above with your own frames.

[Open the editor](https://spritesheetgenerator.online/editor) [See all features](https://spritesheetgenerator.online/features)

## **Keep reading**

[**Pixel art****Pixel Art Animation: Timing, Poses & Walk Cycles** 6 min read](https://spritesheetgenerator.online/guides/pixel-art-animation "Pixel Art Animation: Timing, Poses & Walk Cycles") [**Engines****Import Sprite Sheets into Godot, Unity, Phaser and Construct** 7 min read](https://spritesheetgenerator.online/guides/import-sprite-sheets-game-engines "Import Sprite Sheets into Godot, Unity, Phaser and Construct") [**Start here****Sprite Sheet Basics Explained** 8 min read](https://spritesheetgenerator.online/guides/sprite-sheet-basics "Sprite Sheet Basics Explained")

---

```json
{"@context":"https://schema.org","@graph":[{"@id":"https://spritesheetgenerator.online/#website","@type":"WebSite","description":"Free online tool to create spritesheets for game development. Upload sprites, arrange them, and export as a spritesheet with animation preview.","name":"Spritesheet Generator","url":"https://spritesheetgenerator.online/","publisher":{"@id":"https://spritesheetgenerator.online/#identity"}},{"@id":"https://spritesheetgenerator.online/guides/character-sprite-sheet#webpage","@type":"WebPage","dateModified":"2026-11-01","datePublished":"2026-10-06","description":"Plan a character sprite sheet before drawing it: which animations to make, frames per animation, facing directions and mirroring, cell size, and row layout.","name":"Character Sprite Sheets: Which Animations Your Game Needs","url":"https://spritesheetgenerator.online/guides/character-sprite-sheet","breadcrumb":{"@id":"https://spritesheetgenerator.online/guides/character-sprite-sheet#breadcrumb"},"isPartOf":{"@id":"https://spritesheetgenerator.online/#website"},"potentialAction":[{"@type":"ReadAction","target":["https://spritesheetgenerator.online/guides/character-sprite-sheet"]}],"primaryImageOfPage":{"@id":"https://spritesheetgenerator.online/#logo"}},{"@id":"https://spritesheetgenerator.online/#identity","@type":"Organization","description":"A free, browser based sprite sheet generator for 2D game developers and pixel artists.","name":"Spritesheet Generator","url":"https://spritesheetgenerator.online","logo":{"@id":"https://spritesheetgenerator.online/#logo"},"sameAs":["https://discord.gg/2vvfqwn5k7"]},{"@id":"https://spritesheetgenerator.online/guides/character-sprite-sheet#breadcrumb","@type":"BreadcrumbList","itemListElement":[{"@type":"ListItem","name":"Home","item":"https://spritesheetgenerator.online","position":1},{"@type":"ListItem","name":"Guides","item":"https://spritesheetgenerator.online/guides","position":2},{"@type":"ListItem","name":"Character Sprite Sheets: Which Animations Your Game Needs","item":"https://spritesheetgenerator.online/guides/character-sprite-sheet","position":3}]},{"@id":"https://spritesheetgenerator.online/about#dennis-postma","@type":"Person","name":"Dennis Postma","url":"https://spritesheetgenerator.online/about","sameAs":["https://github.com/Dennis4720"]},{"@id":"https://spritesheetgenerator.online/guides/character-sprite-sheet#article","dateModified":"2026-11-01","datePublished":"2026-10-06","description":"Plan a character sprite sheet before drawing it: which animations to make, frames per animation, facing directions and mirroring, cell size, and row layout.","headline":"Character Sprite Sheets: Which Animations Your Game Needs","inLanguage":"en","thumbnailUrl":"https://spritesheetgenerator.online/guides/og-character-sprite-sheet.png","@type":["Article","TechArticle"],"articleSection":["Sprite sheets"],"author":{"@id":"https://spritesheetgenerator.online/about#dennis-postma"},"image":{"@id":"https://spritesheetgenerator.online/#/schema/image/1"},"isPartOf":{"@id":"https://spritesheetgenerator.online/guides/character-sprite-sheet#webpage"},"mainEntityOfPage":{"@id":"https://spritesheetgenerator.online/guides/character-sprite-sheet#webpage"},"publisher":{"@id":"https://spritesheetgenerator.online/#identity"}},{"@id":"https://spritesheetgenerator.online/#logo","@type":"ImageObject","caption":"Spritesheet Generator","contentUrl":"https://spritesheetgenerator.online/web-app-manifest-512x512.png","inLanguage":"en","url":"https://spritesheetgenerator.online/web-app-manifest-512x512.png"},{"@id":"https://spritesheetgenerator.online/#/schema/image/1","@type":"ImageObject","contentUrl":"https://spritesheetgenerator.online/guides/og-character-sprite-sheet.png","inLanguage":"en","url":"https://spritesheetgenerator.online/guides/og-character-sprite-sheet.png"}]}
```

## Sitemap

See the full [sitemap](https://spritesheetgenerator.online/sitemap.md) for all pages.
